The decision to put on the shelf a 200+ watt box mod, a tank for two spirals and a vape with bottom air flow is taken by more and more vapers. And it’s not that vapers stop vaping, but that the usual devices have been replaced by POD-systems and submods that are compact, self-contained and efficient. To break it down, many vapers prefer a tight cigarette puff because it resembles a cigarette (most vapers in the past are heavy smokers). Exactly for them Vaporesso decided to continue the Target line and released its little brother – PM30 MTL Pod Mod Kit. This device looks very similar to Vaporesso Target PM80, but has less power and initially positioned by the manufacturer as MTL device.
General information
Vaporesso Target PM30 MTL Pod Mod Kit is a compact pod mod with quite powerful built-in battery, the simplest control, designed to use GTX series vaporizers with high resistance. The new device is made in a recognizable design and comfortable form factor with excellent ergonomics. The sub-mod is equipped with a simple board that allows you to use it in three main power modes. The device is designed to use GTX series vaporizers with high resistance, as the device is designed for tight cigarette puffs. The Vaporesso Target PM30 MTL Pod Mod Kit is available in six colors red, green, black, silver, blue and purple.
Outfitting
Despite the fact that this sub-mod belongs to the budget ones, the manufacturer quite decently staffed it. Therefore, in the box the vaper will find:
Target PM30 battery pack;
Two 3.5 ml Target PM30 pod cartridges;
GTX6 “Omega vaporizer; mesh coil;
GTX 1.2″ Omega vaporizer; regular” coil;
USB Type-C cable for charging;
Warranty card;
User’s Manual.
Target PM30 battery pack
Vaporesso recently released their Target PM80 sub-mod for which they specially developed GTX series vaporizers, the range of which allows the vaper to find the best option for every vaper. Given the love of many vapers to a tight cigarette puff, the company decided to modify the Target PM80, making it more compact and less powerful, so the Target PM30 MTL saw the light.
The design of Target PM30 MTL is quite recognizable and reminds a lot of PM80, but with more compact design – 117.1*26.7*22 mm, so you won’t have any problems with carrying the device. The body is made of zinc alloy combined with plastic panels, and the panels can be in both strict colors and bright and youthful.
The Vaporesso Target PM30 MTL Pod Mod Kit is powered by a built-in 1200 mAh battery which is not a bad indicator for a device of this size. The battery is charged via USB Type-C connector, located at the bottom of the device, 1A current.
An important feature of Vaporesso Target PM30 MTL Pod Mod Kit is that the device automatically detects what type of vaporizer is installed, and depending on this, sets one of the two power modes. At that with triple click on the button you can set the output of the device if the vaporizer with the resistance of 1,2 Ohm is installed, then the output is adjusted in the range of 8/10/12 Watts, and if the resistance is 0,6 Ohm, then 20/22/25 Watts. The power mode is signaled by the LED ring around the Fire button – it changes its color from red to green.
Target PM30 pod cartridge
Vaporesso Target PM30 MTL Pod Mod Kit has two cartridges in the box, so the vaper can swap them at any time (very practical if you want to quickly change the taste of the liquid). In the battery block the cartridge is held by strong enough magnets, so the process of changing takes only a couple of seconds.
Since this device is recommended for MTL, you should use GTX 0.6 “Omega; mesh coil, GTX 1.2 “Omega; regular” coil, GTX 0.8 “Omega; mesh coil, the first two are included. Of course, you can also install other GTX series vaporizers, but please keep in mind that not all of them will work, because the maximum power of the device is 30 Watts. The airflow control is not provided from the beginning, the draw is quite tight.
To refill the cartridge you need to move the top of the cover in a straight line and pour 3.5 ml of liquid. A very positive moment filling hole has a check valve, so the cartridge can be considered as non-pouring.
Conclusion and impressions
Vaporesso Target PM30 MTL Pod Mod Kit is quite a good device for MTL-lighting fans, in which the vaper can easily select the mode and the vaporizer. The small compact size combined with practicality and ease of use will make the device a great device for many vapers who don’t particularly like big clouds, but are looking for good flavor.
Advantages and Disadvantages
Disadvantages
Non-adjustable blowing;
Weak charging current.
Advantages
Ergonomic design;
Powerful enough battery;
Easy control;
Three modes of operation;
Automatic vaporizer resistance detection;
The possibility of selecting a vaporizer depending on vaper preferences;
Large amount of cartridge;
Convenient refilling;
Good flavor transfer.