After sub-mods appeared on the vape market, many manufacturers put aside the drawings of box mods and drip sticks, and began to mass produce just such devices. This is not surprising, because many vapers want compact and functional devices that are as easy to use as possible. Vaporesso has a lot of PODs and submods in its range, and one of the most popular is Target PM80, to which vapers have a number of claims. In order to keep vapers happy, the company decided to improve it somewhat, so the Vaporesso Target PM80 SE Pod Mod Kit was presented. Despite the fact that this device is a little longer than its predecessor, it can work with Target PM80 cartridges without any problems and at the same time the manufacturer has released a full-fledged RBA base for this device.
General Information
Vaporesso Target PM80 SE Pod Mod Kit is a mid-sized submod that runs on a single 18650 battery, has an Axon chip board and is designed to use interchangeable vaporizers and RBA base. The design of the new device is quite recognizable, because it is very similar to the previous version, but this is not bad, because the ergonomics of the device is excellent. The device is controlled by the well-known to many vaper chipset Axon chip, thanks to which you can get not only the traditional varivatte, but also a few additional functions. The vaper has five types of vaporizers and serviced base, so there is a lot to choose from. Buy Vaporesso Target PM80 SE Pod Mod Kit is available in six colors red, purple, blue, black, green and silver.
Complete with
The new device is packed quite decently, so the vaper only needs to buy Vaporesso Target PM80 SE Pod Mod, insert the battery, pour the liquid and you can vaporize. In the box the vaper will find:
TARGET PM80 SE Device battery pack;
Two 4 ml TARGET PM80 POD cartridges;
GTX 0.2 “Omega vaporizer; MESH COIL;
GTX 0.6 “Omega vaporizer; MESH COIL;
USB charging cable;
Two spare silicone plugs;
Warranty card;
User’s manual.
TARGET PM80 SE Device Battery Pack
Not so long ago, Vaporesso released Target PM80, which almost immediately appealed to many vapers. Inspired by the success of the first version, Vaporesso Target PM80 SE Pod Mod Kit was released, which differs from the previous version, first of all, with a more interesting design. But in any case, if you want to buy a good pod mod, you can safely choose Target PM80 SE.
The dimensions of Vaporesso Target PM80 SE Pod Mod Kit are larger than its predecessor – 121.3*33.8*24.8 mm, but this will not scare a vaper as the device is still quite compact and easy to use. The form factor, in which the pod-mod is made, is very successful, it sits perfectly in your hand due to the rounded edges and conveniently located the fire button.
The important feature of Vaporesso Target PM80 SE Pod Mod Kit is that the power of 80 Watts is provided by the standard 18650 battery installed on the bottom. The battery can always be additionally charged via the micro-USB connector on the side of the device with 2A current.
Vaporesso Target PM80 SE Pod Mod Kit is controlled by one of the standard chipset of this company Axon chip, thanks to which the vaper will get not only Varivatt mode, but also pulse mode. The response time of the fire button – 0.001 sec, which is quite good for a device of this format.
Of course, this sub-mod is equipped with a small monochrome display where the vaper can find a standard set of information about the operation of the device.
Target PM80 cartridge
It is worth paying tribute to the manufacturer, which provided Vaporesso Target PM80 SE Pod Mod Kit with the same cartridge as the Target PM80, so in case of breakage or other problems; it will not be difficult to find it. The cartridge is held in the battery pack by magnets.
Initially Target PM80 SE comes with two vaporizers – GTX 0.2 “Omega; MESH COIL and GTX 0.6 “Omega; MESH COIL, but you can install any of the GTX series vaporizers or serviced base (company developers presented a convenient and practical base for single coil installation). The airflow adjustment is naturally the same as the Target PM80 with the help of silicone plugs, which are installed in the air intake holes on the battery pack. To refill the cartridge you have to take it out of the battery pack, open the silicone plug and pour in 4 ml of liquid.
Conclusions and impressions
We can confidently say that Vaporesso Target PM80 SE Pod Mod Kit will appeal to many vapers who want a practical and versatile device designed to use vaporizers or RBA base. The device is made very decently, in the original colors, is equipped with quite a decent board and has a good cartridge volume all that most vapers need.
Advantages and disadvantages
Disadvantages
It is necessary to remove the cartridge for refilling;
Inconvenient blowing control.
Advantages
Original colors;
Ergonomic design;
Replaceable battery;
Fast charging;
Productive and functional board;
Adjustable blowing;
Wide range of vaporizers and RBA base;
Large cartridge capacity.