Boxmods with huge screens are rare, but still they are released from time to time. Today I will tell you about a new representative of this class of boxmods – HELL’rsquo;S GATE 75W MINI by Yepecig.
HELL
The boxmod is made of an alloy of zinc, titanium and nickel. Externally it is a nice, boxy boxmod with rounded edges. Control elements are standard: +/-/Fire, located on the side edge of the boxmod. There is also a usb connector. The boxmod is available in four colors: black, steel, red and blue.
HELL
The metal part of the boxmod is mechanically processed to a smooth and pleasant to the touch state. The front and back are made of black plastic. At the bottom of the device there are holes for venting. The boxmod has small dimensions: 25x42x79 mm and will most likely lie comfortably in your hand.
Naturally, a feature of the boxmod is the presence of a huge information display, which shows all the necessary information for the vaporizer and looks like a speedometer.
The boxmod has a maximum power of 75W and a minimum resistance of 0.05 ohm for both varivatta and thermocontrol modes, which are available in nickel and titanium with a limit of 200-600F or 100-300C. canadian vape shop calgary The boxmod works in three modes: VW, Ni200 and Ti. The battery is built in 2400 mah, I don’t think it will be enough for the whole day with that screen! Charging is done with micro-usb connector, through it is also possible to update the firmware.
HELL
Connector 510, steel and located in the middle of the upper edge of the boxmod body, the dimensions of the boxmod will allow you to install atomizers up to 25 mm in diameter.
To summarize. Very nice, pleasant to look and feel boxmod, but I would not take it simply because the battery at 2400 mah and such a size of the screen predict a very small autonomy, and in our world autonomy is an especially important parameter for boxmods with non-removable batteries. Otherwise, the boxmod does not give me any negative thoughts.