After the well-known blogger and Review ofщик Alex from VapersMD started to cooperate with the Chinese company Vandy Vape, one would like to say the phrase Ostap’s head is spinning. The number of joint products, which are released with enviable regularity by this tandem, increases every month. Vapers have not had time to get used to the second Phobia and Berserker-based kit, but Berserker V1.5 MTL RTA, a slightly redesigned tank for cigarette tight puff, has already been presented.
General Info
The Berserker V1.5 MTL RTA atomizer, which is designed for tight puffing, has a 24mm diameter and some rather interesting technical solutions. e-cigarettes in canada The fact that the tank is 24 mm in diameter will be appreciated by many owners of box mods, as 22 mm looks logical and decent not on every device. It is available in four colors rainbow, steel, gun metal and matte black vaper has only to choose.
Kit
As practice shows, the company Vandy Vape can rightfully be considered the most unsparing in terms of kitting always in its boxes you can find a lot of useful extras, which sooner or later will be useful. In the box of Berserker V1.5 MTL RTA caring Chinese put:
Berserker V1.5 MTL RTA;
Metal flask;
510th drip-type;
Nozzle on the drip-type;
A pair of branded Superline MTL Fused Clapton Wire Ni80 spirals;
Spare screws;
A lot of orings;
Blue screwdriver;
Documentation.
Appearance and design
As you might expect, Berserker V1.5 is very similar to its predecessor, but there are plenty of changes as well. The first thing that catches the eye is only a distant similarity in appearance, as many design elements have been replaced or modified.
Drip-tip has become quite different instead of pawn is a more interesting version of stainless steel and delrin or ultem. And the mouthpiece simply unscrews without completely replacing the drip tip. Additional drip-type 510, and quite non-standard interesting shape.
The refill cap, which in the first version many people swore at, has become much more convenient and practical, and now it can be unscrewed without any unnecessary devices and tricks. Depending on the vaper’s preferences, you can use a glass flask of 2 ml or a metal flask of 3 ml, and its height is exactly the same as the glass one, as well as its outer diameter. Immediately answering the question of how with the same height and diameter you can get a different volume in the metal flask inside the selection, which will add 1 ml.
In the Berserker V1.5, the flask is non-removable and is made in one piece with the top cap, so vapers won’t have to agonize about replacing/installing a new flask. Naturally, it is spherical inside in order to maximize the taste of the liquid and enjoy a real cigarette puff.
Base and airflow
The base of the Berserker V1.5 has become significantly more interesting. Despite having two of the same standoffs, it uses screws that are slightly larger and designed to use a slotted screwdriver. If the user does not like slotted screwdrivers, he can easily install Phillips screws, which were carefully included in the kit. Installation of the coil is similar to the first version, but the presence of larger flats on the screws allows you to more securely fix the coil in the landing place. Naturally, there are grooves for biting off the coil legs, which greatly simplify the whole procedure.
Special attention should be paid to the holes for laying the vapor, they are through and a little smaller in size. Many vapers who have laid cotton in the first version know very well how specific this process is, and how much cotton you have to spend to learn how to do it correctly. If the cotton is installed according to the instructions (or rather, as it should be), it will appear under the thread for this special thanks to Alex, because finally there is a visible reference point, which will allow you to do everything as accurately as possible.
Directly blowing the coil is made in the form of a small oval, the length of which allows you to ensure that all the air flow directly to the coil theoretically this approach will provide maximum flavor transfer. If we talk about the holes for puff adjustment, it is the same five holes 1-1.8 mm with a pitch of 0.2 mm, the vaper has a lot to do.
To allow the user to use other orings (harder or softer) while adjusting the airflow, the adjustment ring can be removed.
Conclusions and impressions
In his presentation Alex from VapersMD said that in the updated Berserker he has taken into account all the wishes and comments regarding flaws and bugs. And we can honestly say that he managed to do it, as Berserker V1.5 became much more convenient and practical, and this is an additional plus. It is worth paying attention to the quality of execution of all parts and elements in Vandy Vape still know how to make decent products. There is no doubt about the flavor delivery, as the design of the shaft, airflow, and coil placement have not changed. You can be 100% sure that there will be vapers who will shout that the flavor is not enough/filling is inconvenient/blowing is weak, but there is no way to do without it, because there is no vape device, which was liked by absolutely everyone (the exception is his 2012 vape).
Advantages and disadvantages
Disadvantages
There is still no complete tightness when the airflow is fully closed;
With the steel dome, the level of liquid is not visible for beginners and it will be difficult to control it
Weak origami under the top cap.
Advantages
Rich Kit;
Excellent taste transfer;
Original design;
Two non-standard drip-tips;
Convenient coil installation;
Convenient placement of absorbent cotton;
Option of compatibility with the first version of Berserk.