Just a couple of years ago, only three or four models were presented in the cigarette puff tank segment, and most vapers were in the mood for large clouds of vapor. The popularity of tanks with a cigarette puff is understandable; many vapers are former smokers, and it is this puff that is some reminder of an old habit. After many manufacturers noticed that many users enjoy using cigarette holders, they began to produce them en masse (now almost every company has one or more such tanks in its product range). Advken also made its mark in this direction by releasing Manta MTL, which appealed to many vapers. The success of Manta MTL prompted the developers to release Manta V2 MTL RTA, which, although it resembles its predecessor, has a number of features. It is worth saying that the Advken Manta V2 MTL RTA was initially presented by the company Advken x Q2 Design dOs RTA MTL/DTL (this is the name under which you can find this tank on the Internet), but then it appeared under its real name.
General information
Advken Manta V2 MTL RTA tank tank, designed to install one coil, designed for both tight cigarette puffs and looser hookah puffs, with variable airflow. The design of the tank is significantly different from the previous version, as the new product looks stricter and more solid. e-liquids in canada The use of one coil, the installation of which will not raise any questions, is justified since it is a cigarette maker. The manufacturer paid special attention to the airflow system; the vaper can choose one of four options, among which you can set both MTL and DTL puff. You can buy Advken Manta V2 MTL RTA in two colors: black and steel.
Equipment
Vapers who have encountered Advken products know that they always put their products together very well, and the new tank is no exception. Therefore, in the usual blue box the vaper will find:
Atomizer Manta V2 MTL RTA;
Spare drip tip from Ultem;
Spare glass;
Screwdriver;
Spare screws;
Spare orings;
User’s Manual.
Appearance and design
It’s worth saying right away that the Manta V2 MTL RTA, although it bears the legendary name of the stingray, has many differences compared to the first version. The tank looks very dignified and strict, although it has a number of features regarding its appearance and design. There are no special decorations or decorations on the atomizer, except for the engraving on the top of the tank in the form of the same manta ray. Despite the fact that the manufacturer presented it in only two colors: black and steel, vapers are unlikely to be upset, since the colors are universal.
The tank is small, with a diameter of 22 mm (quite logical for a cigarette holder), so it is perfect for almost all box mods that claim to be stealth. Many vapers will be pleased with the pawn-type drip tip from Ultema 510 format, which can always be exchanged for any one from their collection. The kit includes another drip tip, but with a larger internal diameter so that the tank can be used in DTL mode.
Base, airflow and features of use
Considering that the Advken Manta V2 MTL RTA is positioned as a tank for a cigarette puff, the base in it is designed for one coil. The base is made in the form of two vertical posts with horizontal fixation of the spiral. Installing the spiral will not cause any difficulties, since a similar base has been used more than once by many manufacturers for tanks with cigarette puffs.
Sufficiently large cuts with restrictions are provided for laying the cotton wool, but it should be remembered that it should not be laid very tightly, otherwise you will not be able to avoid a fire due to starvation of the liquid.
The airflow system in Advken Manta V2 MTL RTA deserves special attention. There is a hole directly below the coil, but there are two more holes in the posts to ensure maximum air flow to the coil for the best flavor.
But that’s not all. Air is taken in through three holes at the base of the tank, changing the position of which using a rotary ring, you can get four options for blowing the spiral. Moreover, each of them has its own characteristics, thanks to which you can set MTL or DTL tightening. Which mode is currently in use can be controlled by the letter, which will be visible in a small window located on the side opposite the air intake holes.
Conclusions and impressions
Fans of very tight draws, looking at the Advken Manta V2 MTL RTA, can say that this is far from MTL, but most vapers will appreciate this design. Taking into account the variability of airflow, easy installation of the coil and maintenance, this tank will be an excellent and versatile option for many.
Advantages and disadvantages
Disadvantages
Getting a very tight puff is difficult;
In DTL mode it is necessary to change the drip tip.
Advantages
Strict design;
Convenient installation of the spiral;
Simple installation of cotton wool;
You can set the desired mode with one turn of the ring;
Versatility of airflow;
Good taste.