In this review, I will tell you about a simple and laconic Ehpro pipe mod with an equally simple name Mod 101 PRO.
Mod 101 PRO packaging
Mod 101 PRO is sold in a simple black cardboard box, on the front side is written the name and the manufacturer’s logo, through a transparent window you can see the device itself. The back side is given over to various warnings, stickers and certificate icons. It is impossible to find anything else particularly interesting on the packaging.
What’s in the box
The delivery set at first amazes with its absence, it seems that apart from the mod in the phallic-shaped recess there is nothing here, but then you notice the spacer on the side, and everything else is hidden below.
From the “rest”: a certificate of internal control, a warranty card, fairly detailed instructions and two rings. canadian vape The use of spacers is not necessary in principle, both are more decorative. The first one is steel, it is an adapter from 25 to 22 mm, and the second one is black, it is a protective gasket, and it is needed only if you are afraid of scratching the mod or the evaporator against each other. Another element – an adapter for the 18650 battery is located inside the mod, this part will be discussed below.
Mod 101 PRO. Design A classic pipe mod of increased height (118 mm) and considerable diameter (25 mm). No decorations, no design, no protrusions or other excesses. There are only a couple of inscriptions, so that you do not forget what exactly you are holding in your hands, a small screen and a single button.
There is basically nothing to look at on the sides of the mod, so let’s look at it from above: here is a 510 connector with a spring-loaded pin, in the central part the engineers made an additional groove-depression, which reduces (probably) the sticking of the evaporators, and immediately wrote the serial number and the company name in it. From here you can clearly see that the screen is slightly recessed into the case, this is also a plus, it will not scratch either if accidentally dropped on its side or when carried in a pocket. The button on the opposite side of the screen protrudes beyond the dimensions of the mod, but has a rather tight movement and does not press on its own, even if the device with the battery is lying on it.
Mod 101 PRO. Personal impressions
What I liked
Nice and strict appearance
Works with 18650/20700/21700 batteries
What is simply good
Steel case
There is an adapter for evaporators with a diameter of 22 mm
Ehpro MOD 101 PRO
What is controversial
Large dimensions
There are problems with unscrewing the battery compartment cover
Designed for evaporators with a diameter of 25 millimeters (or 22 with a spacer)
75 Watts and 0.1 Ohm. To hell with it, with the second parameter, but the power could at least be overclocked to a hundred
Mainly for tanks, on drippers it is prone to rapid overheating
No built-in charging
Total
Mod 101 PRO turned out to be controversial on the one hand, but very interesting on the other. It simply attracts attention with its “usually unusual” shape, looks great with steel drippers and tanks, is omnivorous in terms of modern batteries and produces enough power for daily vaping. There are simply no obvious disadvantages in it, there are only controversial points and its own peculiarities, and you quickly get used to the control of the single button. The only significant drawback is the lack of built-in charging, not that it was really necessary, just a matter of convenience. Well, and the price, paying about $ 65 for such a device seems a bit too much to me, but if it cost up to $ 45-50, there would be no complaints at all.